keyboard_arrow_rightPoster

Name of Conference | The Third National Conference of New Technologies in Construction Industry |
Date of Conference | 93/6/20 to 93/6/21 |
Number of Participants | 1800 |
Venue | Saba Hall |
Number of Exhibitors | 47 |
Training Hours | About 28000 individual/Hour |
Number of Papers Submitted | 179 |
Number of Papers Admitted | 127 |
Privilege | Promotion and Renewal |
Number of Foreign Guests | 2 |
No. | Workshop | Presenter |
1 | Materials and innovative technologies in construction industry through an approach to retrofit historic buildings | DR. Golabchi |
2 | Technical certificates for construction and fire proof products: principles for the introduction of international patterns and changes ahead in Iran | DR. Bakhtiary |
3 | Examination of Pall friction dampers design in a simplified manner in special buildings | Sajad Barimani |
4 | Pall friction dampers behavior in erratic special steel frames in height | Ali Kakularimy |
5 | The effect of opening location in composite steel plate shear performance | Rasool Purbaferani |
6 | Evaluation of composite steel plate shear wall performance, considering shape of opening | Rasool Purbaferani |
7 | Utilizing leak detection technology by flame ionization sensor for leak detection and determination of accurate location of built-in gas pipeline network of building | Iman Alizadeh Sorur Amjadi Kashani |
8 | Maximum energy efficiency through double skin façades in high-rise buildings | Parnaz Olfat |
9 | Automatic room temperature control by designing ANFIS controller | Zahra Pezeshki |
10 | Evaluation of energy exchange piles performance as a new important system to reduce energy consumption | Ali Rezaie Fard |
11 | Evaluation of new constructional technologies role in modifying patterns of energy consumption | Meshkoh Morseli |
12 | Optimization of energy consumption in some popular building systems | Dr. Kari |
13 | Examination of challenges in utilizing innovative technologies in construction industry | Messrs. Gheraati, Shykholeslam, Karamlu,Farid, Zanganeh |
14 | Examination and improvement of acoustic performance of light steel frame (LSF) | Afsane Ghaleh Noie |
15 | Numerical evaluation of spare capacity of cold-rolled steel frame with K-shaped bracing | Amin Rabiee Fradonbeh |
16 | Evaluation of cold-rolled steel frame with K-shape bracing dynamic behavior utilizing increasingly dynamic analysis | Amin Rabiee Fradonbeh |
17 | The role of innovative construction technologies in better buildings | Momadreza Hoseinnejad |
18 | Determination of R-coefficient behavior of high-rise structures with belt truss system | Arman Asaturians |
19 | Determination of R- coefficient behavior of metallic industrial structures equipped with steel bunkers | Arman Asaturians |
20 | Analyzing and evaluating non-structural systems with an industrial and construction industry innovative technologies approach (separating walls) | Shiva Vahabi |
21 | Utilizing prefab composite concrete panels as load-bearing walls | Mehrdad Movahednia |
22 | Evaluating new fortification technique using FRP (fiber polymers) in seismic retrofitting non-leveled masonry walls with openings | Dr. Arsalan Kolali |
23 | The effect of increasing hardness of superstructure on the seismic response of base-isolated high rise structures | Sadegh Eatedali |
24 | Fortification of revolving non-symmetric base-isolated shear structures | Sadegh Eatedali |
25 | The effect of lead-rubber base isolator on the level of performance of coaxial braced structure using pushover analysis | Saeed Narooie |
26 | Comparison of the structure performance level with frictional and lead-rubber isolator under steady lateral load | Saeed Narooie |
27 | New facades of building | Dr. Sohrab Vise |
28 | FRP composites with epoxy resin and reinforcing glass and carbon fibers against fire | Engineer Lyli Taghi Akbari |
29 | Light wood-frame construction systems | Dr. Sepehr Gangehie |
30 | Taking advantage of natural light to optimize energy consumption in buildings | Dr. Rima Fayaz |
31 | Industrializing traditional buildings with modern materials and methods of construction | Dr. Sepehr Gangehie |
32 | The position of sporadic products and small-scale producers in the network | Mr. Purasghar |
33 | Experiences of AQR consulting engineers in retrofitting historic buildings of holy shrine | Drs. Golabchi, Alami, Hamami |
34 | Excavation principles | Dr. Shaibani Asl |
35 | Applying active and non-active systems to control structural vibration of high-rise buildings | Dr. Asaturians |
36 | Experimental study of the effect of rubber fibers on concrete | Shahrzad Dashsooz |
37 | Concrete nanotechnology in Industrialization of Construction | Afshin Rezaie khazli |
38 | Comparison of the effect of zeolite and perlite on features of cement mortars | Syed Mojtaba Ostovar |
39 | Study and comparison of Pozzolanicity of Pozzolanic cement containing meta kaolin and perlite | Amin Rezapoor |
40 | Building predictive control | Shahram Aghaie- mrs. Solaymani |
41 | Applying wireless sensors and their application in construction industry | Dr. Mazinani |
42 | New technology of designing and manufacturing electrical circuit in solar buildings coordinated with photovoltaic (BITPV) | Dr. Ahadollah Aazami |
43 | New construction and structure systems | Dr. Havani |
44 | Exploring the utilization of new technologies in Iran energy production | Dr. Heidari |
45 | Introduction of lightweight concrete blocks (features, specifications, privileges and deficiencies) | Dr. Tadayon |
46 | New construction thermal insulations | Dr. Sohrab Vise |
47 | Fortifying armed- concrete structures using advanced technology and providing executive points | Dr. Ali Kheirodin |
48 | New construction technologies from the perspective of 18th topic of National Building Regulations | Mr. Hedayati |
49 | Examining and evaluating high-strength concrete mixture design in high-rise buildings | Dr. Boluri |
50 | Ecological criteria for architects, urban planners and urban managers | Dr. Riahi |
51 | Structure Engineering, possibilities, and challenges | Dr. Hajkazemi |
52 | Pathology of Light steel frame system with construction management approach | Arman Amiri |
53 | Parametric evaluation of seismic behavior of cold-rolled light steel frame with diametric strap bracing | Mehran Abbasi Soorshojani |
54 | Optimal buildings designing through utilizing new technology of building information modeling and introduction of Autodesk Navis Work Software | Alireza Sadeghi |
55 | Implementing risk management in projects with industrialization approach | Mehdi Roohparvar |
56 | Iran’s position in the global construction industry, recognizing the subject, differences (barriers), and solutions | Mr. Erfanian |